Portable air cleaners can help in a room where the central system cannot be improved. They do not replace ventilation, and they only work when sized, placed and maintained properly. This guide shows how to choose and use them in commercial settings.
What an air cleaner does and does not do
- Does: filter particles from the air in a room, with a HEPA filter capturing very small ones.
- Does not: bring in outdoor air, remove carbon dioxide, or control humidity.
- Some do little for gases and odors, unless they include a gas-phase filter.
Size it by air changes
The clean air delivery rate (CADR) is the volume of filtered air a unit delivers, in cubic feet per minute. To judge whether a unit suits a room, compute the air changes per hour it provides: CADR times 60, divided by the room volume. For example, a room of 1,200 square feet with a 9 foot ceiling holds 10,800 cubic feet. A unit with a CADR of 300 provides 300 × 60 ÷ 10,800 = about 1.7 air changes per hour. Two such units would roughly double it. Use the figure to compare options, and not as a guarantee of any health result.
Choosing and placing
| Question | What to look for |
|---|---|
| Is the CADR independently verified? | A rating from a recognized program, such as the one run by the Association of Home Appliance Manufacturers |
| Does it produce ozone? | Avoid devices that intentionally produce ozone. California certifies air cleaners that meet ozone emission limits |
| How loud is it at the speed you need? | Check the decibel rating at the working speed |
| What is the filter cost and change interval? | Include filters in the cost of ownership |
| Where will it sit? | With clear space around it, away from walls and corners, in the breathing zone |
Keep it working
- Record the date of each filter change and the unit’s location.
- Check that units are on and set to the speed you chose.
- Clean the pre-filter as the maker advises.
- Re-check the room’s ventilation, because the air cleaner is an addition and not a substitute.
See our guide to air filtration and filtration for healthcare facilities.
Common mistakes
- Treating a unit as the fix for low ventilation. It cannot dilute CO2 or bring in fresh air.
- Buying an oversized claim. Check the CADR against the room volume.
- Ignoring filter changes. A loaded filter does little.
Questions facility managers ask about air cleaners
Are ionizers and ozone devices a good choice?
Not usually. Ozone is a lung irritant, and some devices produce it. Choose filter-based units that meet the ozone limits.
Where do portable units make sense?
In rooms the central system cannot upgrade, in temporary spaces and in areas with higher risk, together with the best ventilation the room can have.
How do I know the room is better?
Check the ventilation and filtration it already has, then use particle counts or the room’s complaint log. A balancer can confirm the baseline ventilation.
To check a room’s ventilation before adding equipment, call Ghazi Hussain at (908) 323-9780.
Related Posts
- The Importance of Regular HVAC Testing in Government Buildings
- The Importance of Air Balancing in Healthcare Environments
- How Engineers Can Incorporate Smart HVAC Systems into Designs
- How to Troubleshoot Common HVAC Problems in Large Buildings
- Best Practices for Coordinating HVAC Testing with Project Deadlines
- How to Ensure Compliance with Air Quality Regulations in Design
- Understanding the Basics of Test, Adjust, and Balance (TAB) Services
- How Healthcare Facilities Can Ensure Clean and Safe Indoor Air









