Plants are popular in offices and lobbies, and they are often described as air purifiers. The evidence for that is weak at the planting levels real buildings use. This guide separates what plants offer from what they do not, and shows how to use them without creating a moisture problem.
What studies of plants and air quality found
Early laboratory studies found that plants can take up some pollutants in a sealed chamber. In real buildings, air changes constantly, so the effect is very small. The U.S. EPA states that there is no evidence that a reasonable number of houseplants will remove significant amounts of pollutants in buildings. Ventilation, filtration and source control do far more.
What plants do offer
- A pleasant environment, which many occupants value.
- Some sense of well-being, according to occupant surveys, though results vary.
- Visual comfort and a connection to nature.
What plants can cost you
| Issue | Why it happens | How to avoid it |
|---|---|---|
| Extra moisture | Watering and wet soil add humidity | Water carefully, use saucers and watch the humidity trend |
| Mold in soil | Over-watering and poor drainage | Use well-drained pots and remove dead material |
| Allergen sources | Pollen from flowering plants and mold from soil | Choose low-pollen species and keep soil dry on top |
| Pests | Fungus gnats and others | Inspect and treat early |
What works better for air quality
- Source control: low-emitting products and housekeeping.
- Ventilation: verify outdoor air against the design. See the ventilation standards guide.
- Filtration: filters that suit the equipment, well fitted. See our guide to air filtration.
- Humidity control: keep relative humidity in a safe range.
A sensible approach to planting
- Choose plants for their look and the care you can give them.
- Assign someone to water and inspect them on a schedule.
- Keep them away from air intakes and supply diffusers.
- Do not describe them to tenants as an air quality measure.
Common mistakes
- Counting plants toward air quality goals. They do not carry weight in standards.
- Over-watering. It adds moisture and mold risk.
- Placing plants over intakes. They obstruct airflow.
Questions building managers ask about plants
How many plants would it take to matter?
Far more than any building can host. Rely on ventilation and filtration for air quality.
Do any plants help a little?
Possibly, in small ways, but the effect is far too small to plan around.
What should I measure to know my air is good?
Outdoor air at the system, CO2 trends, humidity and filter condition. See why air balancing matters for IAQ.
A note on plants and moisture monitoring
If a building has many plants, put a humidity logger near the largest group for a few weeks. If humidity near the plants runs well above the rest of the room, change the watering routine or move the plants. This takes minutes and prevents the problems that plants cause more often than the ones they solve.
To measure the ventilation your plants live with, call Ghazi Hussain at (908) 323-9780.
Related Posts
- How Routine HVAC Maintenance Can Improve Indoor Air Quality
- The Role of Ventilation Standards in Building Design
- How Healthcare Facilities Can Prepare for Seasonal HVAC Demands
- The Role of Economizer Diagnostics in HVAC System Performance
- The Benefits of Air Filtration Systems for Healthcare Facilities
- How to Reduce Energy Costs with Routine HVAC Inspections
- How to Design Buildings That Maximize HVAC Efficiency
- The Importance of Air Balancing in Architectural Design









