Indoor allergen reduction

Reducing Allergens in Commercial and Public Buildings

Allergens in buildings come from outdoors, from occupants and from the building itself. People with allergies and asthma feel them first, but the controls help everyone. This guide covers the common sources and the measures that work in commercial and public buildings.

Sources and controls

AllergenWhere it comes fromControl
PollenOutdoor air and clothingGood filtration, clean intakes and entry mats
Dust mitesSoft furnishings and carpets in humid conditionsKeep humidity down, vacuum with HEPA filtration and remove unneeded soft items
Mold sporesDamp materials and outdoor airFix moisture and keep humidity under control
Animal danderVisitors and nearby spaces where animals are presentCleaning, filtration and separate spaces for animal use
Pest allergensCockroaches and rodentsIntegrated pest management and prompt cleanup of food and water

Controls that work in buildings

  1. Filtration. Use filters the system can handle, fitted so air cannot bypass them. Higher-rated filters capture finer particles. See our guide to air filtration.
  2. Humidity. Dust mites and mold thrive in damp air. Aim to stay under about 60 percent relative humidity, and ideally 30 to 50 percent.
  3. Entry control. Walk-off mats and a vestibule keep outdoor allergens from spreading.
  4. Cleaning. Damp wiping and vacuums with HEPA filtration, on a schedule.
  5. Moisture. Repair leaks and dry wet materials quickly.
  6. Pest control. Use integrated pest management, which relies on sanitation and sealing before pesticides.

What to check in the HVAC system

  • Filter fit and rating, and the pressure drop.
  • Coils and drain pans, which can hold moisture and growth.
  • Outdoor air intake location and condition.
  • Humidity control in the cooling season.

See how schools can improve IAQ and humidity control for IAQ.

A simple allergen action plan

  1. Log complaints by room and by season.
  2. Check moisture, filters and ventilation in affected rooms first.
  3. Apply the controls above in order.
  4. Re-check humidity and complaints after a month.
  5. Write down what worked.

Common mistakes

  • Using a strong fragrance to mask odors. Fragrances can irritate.
  • Relying on a portable device alone. It does not fix moisture or ventilation.
  • Cleaning dry. Dry sweeping lifts dust back into the air.

Questions building managers ask about allergens

Can a building be allergen-free?

No. The aim is to reduce exposure and remove the conditions that make it worse.

Does a higher MERV filter always help?

It captures more fine particles, but only if the fan can move enough air through it. Measure airflow after changing.

When do we need an expert?

If symptoms persist after the basic steps, or visible mold is widespread.

A cleaning schedule that supports allergen control

  • Daily: damp wipe hard surfaces and empty bins.
  • Weekly: vacuum carpets with a HEPA-filter vacuum, and clean entry mats.
  • Monthly: check filters, drain pans and visible damp spots.
  • Each season: deep clean soft furnishings in high-use rooms, and review the pest log.

Write the schedule down and give each task an owner.

Related reading: The Link Between Indoor Air Quality and Respiratory Health and How Schools Use HVAC Systems for Allergen Control.

To verify ventilation and filtration performance, call Ghazi Hussain at (908) 323-9780 for a quote.

Need Help?

Ghazi-Hussain-Air-Balance-Masters